- Reduced price
- Reduced price
We accept payment methods such as bank transfer, cash, credit cards and Paypal.
Please inquire about the availability of the product by phone +37127650533
If you are not satisfied with the product, we guarantee a refund 14 days of receiving the products
Pellet boiler Kupper OK 20 Teplodar is suitable for heating residential, commercial and industrial premises with an area of up to 200 m². This is a completely redesigned and perfected heating device, which has nothing in common with the previous APG 25 model. All components in the control panel and burner are made in Europe and Japan.
The pellet boiler Kupper OK 20 is fully automatic, set the on and off temperature you need, and the boiler will ignite and go out on its own at the set temperature. For example, you set the minimum threshold to +19, and the maximum to +24 degrees: as soon as the room temperature drops to +19 degrees, the boiler will ignite by itself (a Japanese ceramic heating element is installed in the burner), and as soon as the room temperature rises to +24 degrees , will go out by itself, will go into standby mode - HUMAN PARTICIPATION IS NOT REQUIRED, excessive consumption of fuel and overheating of the room is excluded.
Burning on one bunker up to 5 days (in the off-season up to two times longer) - this means that you will come to the boiler ONCE IN FIVE DAYS. The complete set includes a floor hopper, which can be installed both on the right and on the left, with a hopper volume of 0.35 m³ (210 kg), there is also the possibility of increasing the hopper by 0.2 m³ (130 kg) due to an additional section (purchased separately).
Professional Polish automation allows you to adjust the power of the pellet burner from 4 to 26 kW.
The burner control panel allows for automatic ignition of the fuel, continuous monitoring and adjustment of all parameters affecting the maintenance of the set temperature of the coolant in the heating boiler circuit, heating system, in the room and weather-dependent adjustment of the coolant temperature.
Convenient DAY / NIGHT mode. As an example, the boiler is in your store or at the factory, it is possible to configure it according to the following parameters: from 8 am to 8 pm in the "day" mode, the boiler will maintain +22 degrees, in the "night" mode from 8 pm to 8 am the room temperature will be maintained at +12 degrees. There is also the possibility of setting by day of the week.
Possibility of remote control of temperature and control via the Internet (Internet module is purchased in addition).
Possibility of connecting the circulation pump to the burner control panel. As an example, connect the pump to the control panel, set the required on and off temperature: as the boiler starts up and the temperature of the coolant rises, the pump turns on as soon as the temperature drops, turns off - this is very convenient and economical.
The equipment is absolutely fireproof (if it is correctly installed and properly operated); if something goes wrong or fails, the boiler will go out and give an error on the control panel. If the light is turned off, the boiler will simply go out and, after the light is turned on, it will enter the same mode as it was before the shutdown.
The main type of fuel is good light pellets 6-8 mm: they have excellent heat transfer (2-2.5 times higher than firewood), it is convenient to store them (supplied in sealed 15 kg bags), minimal ash content (you will clean the boiler with ease once a week), affordable price (now there are a large number of pellet producers on the Baltic market).
At any time, in a few minutes, you can disconnect the pellet burner, install the supplied ash door in place and fire with wood, briquettes or coal, thereby turning it into an ordinary wood-burning solid fuel boiler.
To maintain the temperature, it is possible to connect a 6 kW heating element.
Electric power consumption of the pellet boiler Kupper OK 20:
At the moment of ignition in the region of 600 W (no more than 90 seconds)
At the time of operation of the pellet boiler in the region of 40 W
In standby mode, a few watts
Room thermostat ecoSTER 200 is a programmable room thermostat. With its help it is possible to set the boiler on / off based on the room temperature.
Internet module ecoNET 300 - allows you to remotely control your pellet boiler via the Internet. Using a tablet or smartphone, you can turn it on and off, change the operating parameters and temperatures, and remotely monitor the operating mode.